Raphtalia sword - Rising of the shield deals hero (Tate no yusha no nariagari) - 3d print DIY

The sword of Raphtalia from Rising of the shield hero (Tate no yusha no nariagari).

I print in two version:
1-) PLA DIY kit: printed in PLA, the most used filament, it will require some sanding but the biggest defect will ben already be sanded by me.
2-) PETG DIY kit: printed in PETG, it will require some sanding but the biggest defect will ben already be sanded by me. **Note: PETG is a recyclable material that offer optimal mechanical and thermal resistence. The thermic part is useful, for example, if you left the prop in a car under the sun. The PLA at 60 celsius degrees start to soften, and you can find the prop warped.**

Select if you want the first or the second version present in the series. In the case of the second, the gem'll be printed in resin.

You'll need some aluminium or plastic tube of 8 an 6 mm diameter for support. This is for an deals optimal resistance. If possible, the gem of the second version it's optimal if printed in resin.
The sheath have also two belt loop, and you'll need some golden chain to suspend the sheath at the belt like in the series.

For every problem pm me.

Enjoy your print!